Parallax error is the result of the separation between the camera's objective lens and its viewfinder, so the only cameras that do not suffer from the potential for parallax error are the single-lens reflex, in which you view the scene through the camera's taking lens, or the view camera, for which focusing is done on a ground glass at the film plane. All viewfinder cameras are subject to parallax error unless some corrective factor is built in. Some cameras use a tilting viewfinder to correct the angle of view for a given distance; others place marks in the front viewfinder lens to allow the user to adjust the location of the top of the image after determining the desired framing.
stellar parallax
Doug Fany answer: Parallax
Parallax bars are used in photogrammetry and remote sensing. with the use of the principles of parallax and refraction, parallax bars are used to measure the heights of buildings and other features.
Earth isn't a star and doesn't (can't) have a parallax, becuse we use Earth's orbit as a baseline to measure parallax.
Parallax is the apparent change in postion of an object when looked at from two different places. Astronomers use parallax to find how far away nearby stars are.
The parallax error happens when you take a picture using your digital camera and the picture does not appear to look the same as it did in the viewfinder. The cameras that may have this error occur are the twin lens reflex cameras and cameras that include viewfinders.
Film Camera is the correct answer.
Good lens quality , no parallax error & good quality film .
Parallax Error Beheads You was created on 2008-10-20.
The difference between an actual correct view and a displaced visual parallax error
A View camera or an SLR
Zero error and parallax error
parallax error - reading of volume of burette
simply speaking, systematic errors are those you can improve on( so if you have a systematic error, its probably your fault). Random errors are unpredictable and cannot be corrected. A parallax error can be corrected by you and if there is a parallax error, its probably your fault.
No
in optical instruments,while measuring the lenght,the object and the image must overlap,if not it would show parallax error.
zero error apparatus error experimental condition experiment error parallax error