The parallax error happens when you take a picture using your digital camera and the picture does not appear to look the same as it did in the viewfinder. The cameras that may have this error occur are the twin lens reflex cameras and cameras that include viewfinders.
Film Camera is the correct answer.
Parallax error is the result of the separation between the camera's objective lens and its viewfinder, so the only cameras that do not suffer from the potential for parallax error are the single-lens reflex, in which you view the scene through the camera's taking lens, or the view camera, for which focusing is done on a ground glass at the film plane. All viewfinder cameras are subject to parallax error unless some corrective factor is built in. Some cameras use a tilting viewfinder to correct the angle of view for a given distance; others place marks in the front viewfinder lens to allow the user to adjust the location of the top of the image after determining the desired framing.
Good lens quality , no parallax error & good quality film .
The difference between an actual correct view and a displaced visual parallax error
Parallax Error Beheads You was created on 2008-10-20.
When aligning the crosshairs of a rifle scope with a target, if the shooter's eye is not directly centered behind the scope, a parallax error can occur. This causes the crosshairs to appear off-target even though the rifle is aimed correctly. Adjusting the parallax on the scope can help eliminate this error.
A View camera or an SLR
No
Common causes of a "lens error" on a Canon camera include dirt or debris getting stuck in the lens mechanism, a misaligned lens, or a dropped camera. Solutions may include gently tapping the camera, using compressed air to remove debris, or sending the camera to a professional for repair.
Common causes of a Canon Error 99 message on a camera include issues with the lens contacts, battery, or memory card. Troubleshooting steps to resolve this error may include cleaning the lens contacts, replacing the battery, formatting the memory card, or updating the camera firmware.
A parallax error is when the experimenter reads or record incorrect measurement of a quantity.This may happen because he/she does not know how to read the instrument and can be prevented by learning to read the instrument correctly.
Random errors can be parallax and from changes in the environment.