That is no more difficult than hooking it up to a tv.It's the way I hook mine up because the ports are on the front and I can pull them out any time I want to take it somewhere.
You unhook the connection from the cable box to the TV and connect it to the VCR input. You purchase a short cable and install it from the VCR output to where the cable was connected to the TV. The TV will get the cable box signal through the VCR with no problem when you are not using the VCR. If the cable box was connected to the surround sound or Home Theater and then the TV then connect the cable box to the VCR and then the surround sound or home theater.
If a person has to turn on their VCR in order to turn on the TV, then the VCR is working as the input and the output. If you do not want this to happen, disconnect the cables from the VCR and directly connect them to the TV.
Yes, I can it's just pice of cake for me. Thanks,
In order to get the full HD experience you need an HDMI cable to connect a DVD/VCR combo to an HDTV.
yes
Yes, you can as long as you have the coax cable connected to the VCR first and then to your TV. Some TVs have RCA A/V outputs also and you can connect a VCR to them. Even better is to use the RCA A/V connections from the cable box to VCR, VCR to TV.
If the VCR and/or DVD don't have the same type of connector that your tv set does, you can buy adapters that will convert from cable to two-prong in order to connect to your tv set. Connect from the OUT connector on the back of the DVD or VCR to the back of the tv where you normally connect the antenna. The antenna is not necessary when viewing the DVD or VCR.
Connect the TV converter output to the receiver's TV input. Connect the DVD player to the receiver's DVD player input. Connect the VCR to another video input on the receiver. Thrown the equalizer out, as modern receivers don't have any way of connecting them to all the other components.
Connect them to the TV
Connect the VCR to the HDTV thru the video cables, (video 2) input. Connection Options 1. TV Antenna --> Converter Box --> VCR --> your television. 2. TV Antenna --> Converter Box --> VCR PLUS your television This only works if your converter box has at least two types of output: one type of output that the VCR has an input for AND another type of output that your television has an input for. 3. TV antenna cable split into two with a splitter, one going straight to your television (would only work if you have an HDTV set) and the oher going to the converter box and then to the VCR, and the VCR's output to your TV's secondary input socket. #1 will get you the worst picture quality on your TV and #3 the best if you have an HDTV.
If you plug your DVD player into your VCR, it will not display on your television. You need to connect your DVD player either directly into your TV via S-video, Component, or HDMI cables or you can connect the DVD player to an audio receiver first, which should then offer an output to the television.
Just Internet