Pro Tools LE (up to version 8.0) will only work with Avid (Digidesign) hardware, ie. MBox, Digi 002, 003 etc.
Pro Tools M-Powered works with approved M-Audio USB and Firewire audio interfaces, not the USB microphones.
It is not possible to use multiple USB or Firewire audio devices in Pro Tools LE or M-Powered.
Yes, you can use any USB MIDI Interface with ProTools. Note that ProTools SE and M-Powered require an apporved M-Audio interface to be attached to run the program.
No,This cannot be done,You must have some digidesign, M-audio hardware or compatible control interface for pro tools to work
You can use a headset (NON USB) or a NON USB mic no you can't dummy!
Yes, although you will need an M-Audio interface connected to the computer in order to launch ProTools MPowered, or an Avid audio interface connected if you plan to run ProTools LE versions 8 or earlier.
To get a USB mic to work with FL Studio, first connect the microphone to your computer's USB port. Then, open FL Studio and go to the "Audio Settings" under the "Options" menu. Select your USB mic from the input device dropdown menu. Finally, create an audio track in the mixer and select the USB mic as the input source to start recording.
You can`t... Since the Plug in for the Guitar hero Mic is a USB and the Controller is way different from a USB Plug in.
any mic will do aslong as it has a usb
search on amazon.com OPTIONAL are there any usb headset mics.
Any USB mic should work with Guitar Hero Any USB mic should work with Guitar Hero
it depends on the jack you have, there is a hole on the side of your laptop with either a mic symbol next to it is colored red. if you insert the mic in there it should work. if the end of the mic is USB, you need to connect it into your USB slot. if the laptop doesn't pick up the mic, you need to go into my computer and go on devices to find it! however you laptop might not be compatible with the mic.
No. A USB mic plugs directly into the USB port of your computer. The ART MB 127 is designed to amplify a standard dynamic or condenser mic.
If your MXL mic is a condenser mic, the cable will need to have phantom power turned on in order to work.