You can control the treble and bass in JVC surround sound speakers if the surround sound receiver you are using has treble and bass controls available.
Bose surround sound does not compare favorably to Altec Lansing. The speakers produced sound that was mediocre at best and had too little bass and too much treble as compared with the Altec Lansing speakers.
Tone control adjust the bass, and treble. Treble makes the sound thin and high, and bass makes it lower and more full.
Your speakers are not balanced. There should be settings for the speakers on the stereo that you can adjust for bal (balance) bass, treble etc. The balance # between these left and right speakers should be the same. If the volume is still imbalanced after adjusting the controls, there may be a problem in one of the speakers or in the radio.
Speakers designed for high-frequency reproduction, such as tweeters or small bookshelf speakers, can provide more treble than bass. Additionally, certain studio monitors and satellite speakers, which prioritize clarity and detail in the higher ranges, often have a balanced or treble-heavy frequency response. Subwooferless setups, like some sound bars or compact speakers, may also lean towards treble, emphasizing vocal clarity and instrument detail over deep bass.
In music, a Treble is a boy whose voice has not yet broken, and who generally sings the top part of a system. Also, in bell ringing (see campanology), the treble, is the lightest bell in the tower.
1002 only has tone controls on the inputs 1 and 2
A Modified Rickenbacker 360-12 . This guitar had a middle pickup added and a new control assembly added. THe Stereo function was removed from the original wiring . THere was no adjustable tone control . Two Switches operated the pickup selections and each pickup had its own tone control. THere was a Master Volume nearest the strings. At some point Roger (he had changed his stage name to Roger about this same time ) added a Vox Treble booster to the controls. This added treble , but also some gain .
Either effect pedals, the knobs on the bass itself, of the bass-mid-treble controls on the amplifier
Tone and volume controls on audio devices allow users to adjust the sound output to their preference. The tone control typically modifies the balance of bass and treble frequencies, enhancing or reducing specific sound characteristics for a more pleasing audio experience. Meanwhile, the volume control adjusts the overall loudness of the audio output, enabling users to set it to a comfortable listening level. Together, these controls help tailor the listening experience to individual tastes and environments.
They have many good features such as the terminals of the power amps are directly connected to the loudspeaker drive units and the bass and treble are filtered at a much lower signal level. There are also many downsides to active speakers such as the cost.
Volume Control Light Dimmer Tone Control Bass Control Treble Control Fan Speed Control
The best settings for bass and treble depend on personal preference and the type of music being played. Generally, a good starting point is to set both bass and treble around the middle (0 on a scale from -10 to +10), then adjust based on your listening environment and the characteristics of your speakers or headphones. For a warmer sound, you might slightly reduce treble and boost bass, while for a brighter sound, you can increase treble and moderate bass. Ultimately, it's best to experiment until you find a balance that suits your taste.