turn ignition to position 2 press 0 button twice within one second switch off ignition press and hold 0 button down and switch on to position 2 again still holding down 0 button after ten seconds will bleep job done
how do i reset service settings on c200 kompresor
To give you the required instructions to reset the maintenance interval the chassi number is required.
To reset the service indicator on 1998 Mercedes Benz C200 . Turn the ignition key to position 2 and press the 0 on the left of the cluster twice. Then turn the key to position 0 Then press and hold the 0 button on the left of the cluster whilst turning the key to position 2. Continue holding the 0 button until you hear a signal or beep. Release the 0 button after you hear the beep. Service indicator will then reset.
how do i locate the coil pack on a 1998 Mercedes c200
To reset the service indicator on a Mercedes C200 CDI, turn the ignition to the "on" position without starting the engine. Press the gas pedal three times within five seconds, then turn off the ignition. Finally, turn the ignition back on to verify that the service indicator has been reset. If the indicator remains, repeat the process.
To reset the service indicator on a Mercedes C200, first, turn the ignition to the "On" position without starting the engine. Then, press the gas pedal three times within 10 seconds. After that, turn off the ignition and start the engine to ensure the service indicator has been reset. If this method does not work, consult the vehicle's owner manual for specific instructions related to your model year.
To reset the service codes on a Mercedes-Benz C200, first, turn the ignition to the "On" position without starting the engine. Then, press the gas pedal three times within ten seconds. After that, the service indicator should reset, and you can verify by checking the service reminder display. If the steps don't work, consult the vehicle's owner manual or a professional mechanic for assistance.
Fuel pump? It was on my 1998 E320. $1,100 with filter.
You need a star diagnostic computer to reset this. The dealer has one and some MB indepedent mechnics have them as well.
To reset the tire pressure monitoring system (TPMS) on a 2010 Mercedes-Benz C200, first ensure that all tires are inflated to the recommended pressure. Then, turn the ignition to the "ON" position without starting the engine. Press the "Menu" button on the steering wheel, navigate to the "Vehicle" menu, and select "Tire Pressure." Finally, choose the option to reset the tire pressure, and confirm the action.
C200 key fob problem
4 years