0
What else can I help you with?
How do you connect Dish TV to Braviva FullHD?
You can connect your DISH receiver to your Bravia TV using one of 4 methods: Coax cable connected to your coax port (non HD receiver) RCA (composite cable) - yellow, white, and red tips Component cable/ audio cable - Green, blue, red, white, and red (white and red for audio), HD receiver or HDMI cable (HD receiver). The component and HDMI give the highest video and audio quality. To receive HD programming, you need an HD receiver and HD programming package.
What is the best way to connect my TV to the cable outlet using a TV coax cable?
To connect your TV to the cable outlet using a TV coax cable, simply plug one end of the coax cable into the cable outlet on the wall and the other end into the "Cable In" or "RF In" port on your TV. Make sure the TV is set to the correct input source (usually "Cable" or "Antenna") to receive the cable signal.
Can you use any coax cable for satellite tv?
This would depend upon your TV and the receiver and if it has a coax port available on the back. You can use an RG6 coax cable between the receiver and TV. Most newer HD receivers do not have a coax port on the back
How do you hook your Xbox 360 up to your computer since the computer is hooked up to the tv and the sound system?
The only way to hook it up is to have a video card that has a coax input port. You will also have to have a converter to connect the 360 Cable and the coax cable too.
How do I connect audio on my samsung smart tv to home stereo speakers?
To connect your Samsung Smart TV to home stereo speakers, you can use either an optical audio cable or an HDMI ARC cable, depending on your speaker system. For optical, connect the cable from the TV's optical audio out to the optical input on your stereo. If using HDMI ARC, connect the HDMI cable from the TV's HDMI ARC port to your stereo's HDMI ARC port. Finally, make sure to adjust the audio settings on your TV to output sound through the selected connection.
This is not an HDMI cable. Its for Playstation only. HDMI to DVI would be a cable, but does not support audio. We do not have a way to tap the audio off of an HDMI port.?
This is not an HDMI cable. Its for Playstation only. HDMI to DVI would be a cable, but does not support audio. We do not have a way to tap the audio off of an HDMI port.
Can an XLR mic cable can be plugged into a MIDI port?
No. MIDI is a data port, not audio port.
How can I plug a guitar into a computer?
You can plug a guitar into a computer by using an audio interface or a USB guitar cable. Connect the guitar to the interface or cable, then plug it into the computer's USB port. You may need to adjust the computer's audio settings to recognize the guitar input.
How do you connect sound bar to Toshiba ct90325?
To connect a soundbar to a Toshiba CT90325 TV, first ensure both devices are powered off. Use an HDMI cable to connect the HDMI ARC (Audio Return Channel) port on the TV to the HDMI OUT port on the soundbar, or alternatively, use an optical cable from the TV's optical audio output to the soundbar's optical input. Once connected, turn on both devices and select the appropriate audio output setting on your TV to ensure the soundbar is used for audio playback. Adjust the sound settings as needed for optimal performance.
How do i connect my projector to my PS3 and surround sound system each console only has one HDMI connection?
The PS3 is capable of outputting video from its HDMI port, while at the same time outputting audio from the PlayStation AV port. You would connect anyPS2/3 AV cable that had stereo RCA outputs (the pair of red and white plugs), but you would not connect the video plug(s) of that cable (S-video, RGB plugs, or a yellow plug). You would leave the video connectors unplugged because you are using HDMI for video. But a better option would be to connect a cable from the PS3's optical audio port for surround sound. If your surround receiver has a digital optical audio input, use that. It will allow you to hear 5.1 channels of surround audio. The red and white RCA plugs can only support 2.0 channels of audio (stereo).
What is an IDE port?
a port for the IDE cable to connect the hardrive and cddrive to the motherboard.
How do you connect zune when the cable is in your zune?
You connect the other end to a usb port.
