You will have to either plug in a voltage converter to drop the voltage from 220 to 110 or rewire the main power supply inside the amplifier (if this is possible). Most electronic equipment will run on either 50Hz or 60Hz power cycles, so there is no conversion necessary for the frequency.
you can't
Depends. Some smaller stuff can usually run on both, in which case it will be printed on them. If it isn't, you can't run a 220v item on 110v.
No. For more information see the answers to the Related Questions shown below.
Yes, purchase a step-down transformer.
I have a sole F60 bought in US and I use it now in France with a transformer ; you never know if you can use it or not, sometimes it works , sometimes not...I don't know why maybe it's a problem of frequency...
Nothing happens. The stereo has a transformer that converts the power to DC, and 50 or 60 Hz input makes no difference.
The internal working of the motor is designed for 110V/60Hz. Your stepdown converter is from 220V/50Hz to 110V/50Hz. Frequency converters from 50Hz to 60Hz are very expensive (many times the cost of a new clipper). Therefore it is better you get a clipper designed for 220V/50Hz. If you still like to put your clipper to use, then the most cost effective solution would be to get a "car inverter" that would convert 12V DC to 110V/60Hz AC.
It would involve some electronics work but it could be done. Might add that it could be more expensive than just buying the proper power supply. Use Use 220V 60hz motor to run 110V 50hz Generator.
NO dear we can not rotate a 110 vlolt motor on 220,but if your voltage is 110v then y can rotate it on 50hz ,no problem,but it will rotate at lower speed, ENGR. NASEER AHMED,PAKISTAN
Yes, no problem.
220v 50Hz
Depending on the device, it may or may not work. And if it works, it won't work properly. A 60Hz devices needs 60 cycle current, not 50.