0
What else can I help you with?
What does an ohm meausure?
Ohm is the unit used to measure electrical resistance. It is a derived unit equal to 1 kg m2 s-3 A-2 In many situations a simpler conversion is that 1 Ohm is equal to 1 V per Amp (Resistance = Voltage/Current)
What is the breakdown of the ohm units?
The ohm unit measures electrical resistance. It is represented by the symbol . The breakdown of the ohm unit is as follows: 1 ohm is equal to 1 volt per ampere. This means that if a voltage of 1 volt is applied across a circuit and it produces a current of 1 ampere, then the resistance of the circuit is 1 ohm.
Do three 1m ohm resistors equal a 3m ohm resistor?
Only if you connect then in series. RSERIES = Summation1toN (RN) RPARALLEL = 1 / Summation1toN (1 / RN)
Do 5 1 ohm resistors equal 1 5 ohm resistor?
it depends on how we are connecting them.if 5 1 ohm resistors are connected in series then the equivalent resistance is 5 ohms.if they are connected in parallel then the equi resistance is 1/5 ohms.
17 Ohms to kilohms?
the answer is .017 kilohms. To get this answer you will do a unit converions knowing that 1 kilohms is equal to 1 ohm.So...17 ohm * (1 kohm/1000 ohm) = .017I realize that's a typo, but that conversion should read 1 kilohm is equal to 1000 ohms.
How many micro ohms to 1 Kilo ohm?
m (milli) ohm = 1/1000 ohmµ (micro) ohm = 1/1000000 ohmn (nano) ohm = 1/1000000000 ohmp (nano) ohm = 1/1000000000000 ohm
1 mega ohm?
1 mega ohm=______________ ohm?
What is a unit used to measure resistance?
The " Ohm " is. 1 ohm is the resistance across which 1 volt of EMF appears when the current through it is 1 Ampere.
How much is 1 megohm?
1,000,000 ohm
What is the number of equal parts into which a conductor having a resistance 100ohm should be cut to obtain the resistance 1ohm if the parts are connected in parallels?
To obtain a total resistance of 1 ohm from a conductor with a resistance of 100 ohms when the parts are connected in parallel, you need to cut the conductor into 100 equal parts. Each part will then have a resistance of 1 ohm. When 100 of these 1-ohm resistors are connected in parallel, the total resistance is calculated using the formula ( R_{total} = \frac{R}{n} ), where ( n ) is the number of resistors, resulting in ( R_{total} = \frac{1, \text{ohm}}{100} ) = 1 ohm.
What is the principal of the ohm's law?
Ohm's law says that voltage is equal to current times resistance.
What is the unit measurement for resistance?
the answer is ohms
