The Sanyo Multiverse Xtrax projector series had quite a few models. If you need to know the model of your projector, check the label next to the power input. One possible model is the PLC-XE40.
After power on / warm up is complete. Hold the power button in for 20 seconds. Lamp hours will appear in upper right hand corner.Rejean Deragon, CTS
The most probable cause of a faded image is a failing bulb but this is not always the case. You might find when you replace the bulb it make little difference, if this happens it is a sign the the power supply in the projector is failing.
You will find it molded into the casing or on a metal plate close to the power cord input.
The energy consumption of a projector varies depending on its brightness, resolution, and features. Typically, a projector can consume anywhere from 150 to 400 watts per hour when in use. It's recommended to check the manufacturer's specifications for the specific energy usage of a particular projector model.
Parallel universes are hypothetical which means their existence is only a conjecture.
The power consumption of an basic model of LCD projector is around 250W to 400W depending on the make and model, brightness 2000 to 3000 ansi lumens SVGA projector.
what is the power rating of a transister
what is the power rating of energy
Due to the bright bulb, the 3M 2000 overhead projector can use a substantial amount of power and is not, unfortunately, Energy Star rated.
The power rating is on the bottom of the 3ds, the power rating is 4.6V 4.1W, the power suply input is 4.6V 900mA. the DSI charger will work on a 3DS.
Every laptop has a different power rating.