0
I have two Audio Files of the same content.
File 1 has a bigger file size, is a little louder than File 2 and seems to have an AAC codec. It has 418kBit/s and 48000 Hz with 2 channels.
File 2 has a slightly smaller file size and seems to have an AC-3/E-AC-3 codec. It has 448kBit/s and also 48000 Hz with 2 channels.
Which of the two files has better quality? Which one is to keep and which one to delete?
Thanks for your help!
What else can I help you with?
What is two metasites files you can use to locate audio or video?
metasites and locating audio and video files.
What is a mash-up?
Mixing two or more audio files together
What should you get two JL Audio w3 or one MTX 9500?
Two JL Audio w3s should be choosen over one MTX 9500. JL Audios are a better brand than MTX and will have overall better quality and be worth spending the money on.
What are the differences between mono and stereo audio, and how do they affect the overall sound quality of a recording?
Mono audio uses a single channel to reproduce sound, while stereo audio uses two channels to create a sense of space and directionality. Stereo audio typically provides a more immersive listening experience with a wider soundstage and better separation of instruments or voices. This can result in higher sound quality and a more realistic representation of the original recording.
How much video time is 700MB?
It depends on the quality of the video and audio, but usually around two hours.
How can you overlay a video file and two separate audio files using windows movie maker?
There is only one audio track to work with in Windows Movie Maker. The only other audio track is connected to the Video Track (the video's audio).Therefore, you can only have one video (with audio) in the Video Track and one audio/music insertion in the Music/Audio Track.
How does DVD audio differ from CD audio?
DVD-Audio is a digital format for delivering high-fidelity audio content on a DVD. It is not intended to be a video delivery format and is not the same as video DVDs containing concert films or music videos. It offers many possible configurations of audio channels with far higher audio quality.So DVD-Audio has much more functions than CD audio.DVD audio recordings can provide far better sound quality than CDs. The chart below lists the sampling rate and accuracy for CD recordings and the maximum sampling rate and accuracy for DVD recordings. CDs can hold 74 minutes of music. DVD audio discs can hold 74 minutes of music at their highest quality level, 192kHz/24-bit audio. By lowering either the sampling rate or the accuracy, DVDs can be made to hold more music. A DVD audio disc can store up to two hours of 6-channel, better than CD quality, 96kHz/24-bit music. Lower the specifications further, and a DVD audio disc can hold almost seven hours of CD-quality audio.In an audio CD or DVD, each bit represents a digital command telling the DAC what voltage level to output. While an ideal recording would follow the raw waveform exactly, digital recordings sample the sound at different frequencies, and therefore lose some of the data.
Why are S video ports better than composite out ports?
The picture is slightly better in some circumstances because the S-Video separates the brightness and color signal from the source on two conductors in the cable. The resolution is the same, and does not effect the audio quality. If your TV has only S-Video or composite connectors, you may notice no difference in the quality of the picture. The big steps in quality upgrade come when you use a component video or HDMI cable.
Your hd flatscreen does not have HDMI input can you still plug a playstation3 in and get good image quality and how about the bluray image from same?
next down in quality from HDMI is DVI picture with digital audio (actually the same, just split into 2 streams)). next down in quality from HDMI is DVI picture with analog audio (stereo only) next down in quality is component video (3 wires) and digital (optical) audio next down in quality is SVHS picture with digital (optical) audio) then the same two above only with analog audio, stereo only. last is composite video and analog audo. with no HDMI input, choose the next best inputs from the above list.
What is better a four or two stroke engine?
in my opinion a two stroke engine is a better quality engine as compared to a four stroke engine!
What are the two parts of an audio connector?
The two parts of an audio connector are the jack and the plug.
What are the differences between mono and stereo sound, and how do they affect the quality of audio output?
Mono sound uses a single audio channel, while stereo sound uses two channels to create a more immersive listening experience. Stereo sound provides a sense of direction and depth to the audio, making it more realistic and engaging. This difference in channeling affects the quality of audio output by enhancing the clarity, spatial awareness, and overall richness of the sound.
