0
What else can I help you with?
How loud does a monster amplifier get?
A monster amplifier is about 500 watts, which means the amplifier is louder than most.
What kind of products does Loud 'N Clear Electronics produce?
Loud 'N Clear Electronics, also called Loud & Clear, sell commercial audio/ video systems. Some of their products include a 'Personal Sound Amplifier' and a 'Personal Sound Amplifier Headset Earphone'.
What is a mp3 mp3 amplifier?
It is a speaker for mp3 player to play music loud.
How loud can an electric guitar get?
It has an Amp.,so that makes it alot louder,and bass is for back ground ,guitar is to be recongnized.
How many watts will be loud in a car amplifier?
100 watts is great, 150 watts may be too loud for some, and there is higher watt amplifiers made.
The stereo in your 2005 Dodge Ram doesn't go loud enough Can you make it louder?
add an amplifier
What effect amplifires have on guitars?
Without being plugged into an amplifier, a solid-body guitar cannot be heard further than 10 or 12 feet. The amplifier makes the guitar electronics sound loud enough to be heard by others . . . sometimes even too loud for others.
Can I use an amplifier which provides less power than my speakers need?
If you use a lower rated amplifier than your speakers, your speakers won't be able to be as loud but won't suffer any damage.
What made the electric guitar so loud?
the amplifier. the more output wattage and more speakers it has makes the sound louder
Can you use your computer as a loud speaker you have a microphone and speakers with the computer can speaking into the microphone and instantly transmit the voice to make it loud at the speakers?
If the motherboard has a mic jack,if not you need a sound card with one. It will only be as loud as the software allows, it is not an amplifier. But you can run it to an amp or your stereo and then to speakers.
How do you hook a Amplifier up to your Amp?
To hook up an amplifier to your amp, first make sure both devices are powered off. Connect the output of your amp to the input of the amplifier using appropriate cables, typically RCA or 1/4" TRS cables. Ensure that the amplifier is set to the correct input source, and then power both devices on. Adjust the volume levels gradually to avoid any sudden loud sounds.
Is 275w root mean squared speaker can be use in 120w root mean squared amplifier 4ohms?
Yes. The "275W" is the maximum power that the speaker can handle at its input. The "120W" is the maximum undistorted power that the amp can deliver in the loud spots with the volume wide open. So the amplifier will never overdrive the speaker. The impedances of the speaker and amp-output should match. If one of them is marked "4 ohms", then they both should be. If they're not the same, then . . . -- the speaker may not sound as 'crisp' as it should. -- the amplifier may not deliver as much undistorted power as it should. -- the amplifier may not run as cool as it should. -- with an extreme mismatch and extended loud spots played at high volume, the amplifier may even be damaged.
