0
What else can I help you with?
Where is the O2 sensor on 1993 Toyota T100?
Where is the O2 sensor on 1993 Toyota Mr2
How do you change the alternator on a 1991 Toyota MR2?
To change the alternator on a 1991 Toyota MR2, first disconnect the negative battery terminal to ensure safety. Remove the drive belt by loosening the tensioner, then detach the alternator by unbolting it from its bracket. Disconnect the electrical connections, then install the new alternator by reversing the process—reattaching the electrical connections, securing it in place, and reapplying the drive belt. Finally, reconnect the battery terminal and test the new alternator.
How do you change speedometer for 1986 mr2?
how to fix speedometer for Toyota mr2
Where is the oil filter located on the 1993 Toyota MR2?
by the oil dip stick
What does an orange battery light on a Toyota MR2 mean?
Problem with the charging system. Most likely the alternator is defective.
Where is the battery located on 1993 Toyota MR2?
under the hood behind the spare tire.
How do you change a themostat in 1986 Toyota MR2?
Pictures and instructions are found here: http://www.padandwheels.com/mr2/thermostat/thermostat.html
Is a Toyota MR2 faster than a Honda NSC?
The Toyota mr2
How do you replace an alternator in a 1991 Toyota MR2?
unbolt the negative power wire unplug the positive power wore remove the tension bolt on the top of the alternator remove the lower bolt and pull out the alternator
Firing order for a Toyota 2.2 mr2 engine?
For MR2 2.2, production years 1991 and 1993 the firing order is (1,3,4,2).For other years I don't know.
How to remove an alternator off a 1986 mr2?
see this page for pictures and instructions: http://www.padandwheels.com/mr2/alternator/alternator.html
How do you check the alternator on my 1988 Toyota MR2?
To check the alternator on your 1988 Toyota MR2, first ensure the battery is fully charged and the connections are clean and tight. Start the engine and use a multimeter to measure the voltage at the battery terminals; it should read between 13.8 to 14.4 volts if the alternator is functioning properly. If the voltage is lower, the alternator may not be charging the battery effectively. Additionally, listen for any unusual noises from the alternator and check for signs of wear or damage to the belts and connections.
