0
What else can I help you with?
What to do when oil has been added to brake fluid?
The fluid needs changed and flushed. The master cylinder, hoses, and calipers could need changed.
Changed pads rotors calipers brake hoses bled lines am getting fluid to the brakes there are no leaks brake pedal is stiff when engine is off but it loosens when engine starts no brakes why is this?
the master cylinder is whats bad
Changed wheels on1998 Malibu and did front brakes now wheels hitting calipers wheels are gm 15inchCould someone please tell you why calipers are hittingthanks?
either the wheels you put on are smaller or the calipers are bigger or even both :P
How do you know when the calipers need to be changed?
They Seldom Go Bad. Inspect For Leakage And Sticking. If Yours Stuck Replace It, And The Brake Hose Also. One Reason We Have Trouble With Calipers Is Not The Caliper But The Brake Hose. The Hose Will Rot On The Inside Not Allowing The Brake Fluid To Flow Back Into The Master Cylinder There For Causing Calipers To Stick. If Yours Isn`t Leaking It Should Be OK. Be Sure To Inspect The Brake Hoses, If They Appear Bad Replace Them. GOOD LUCK
Why does a 1996 dodge 2500 pull to the left when you put on the brakes changed calipers both sides still does this it is a v 10?
Three main causes, calipers, hoses, and pads.
Should you change both calipers at once?
Calipers do not have to be changed in pair unless both are bad, however the pads should be changed on both at the same time, since they come as a set, and you can use them to detect brake issues from one side to the other, by wear of the pads.
Why do spark plugs crack in a 2000 for explorer?
=why do my plugs keep cracking in a 2000 for explorer....changed four already
Can a 5 cylinder truck be changed to a 4 cylinder truck?
Yes but it wouldn't run very well
How do you change brake pads on a 1997 Toyota Celica?
Brake pads on a 1997 Toyota Celica are changed by removing the wheels, unbolting the calipers, and removing the old pads from the calipers. The caliper piston must be pushed in before the new pads can be installed.
Can anybody tell me how to fix a p0135 trouble code on a 2002 explorer if i already changed the sensor?
Code P0135 means upstream oxygen sensor heater circuit problem right cylinder bank. Did you clear code after replacing the oxygen sensor?
When should timing belt be changed on 2005 Toyota solara se coupe 4 cylinder be changed?
The 4 cylinder has a timing chain that does not require replacement and is designed to last the life of the engine.
Why does security light blink after lock cylinder is changed?
Lock cylinder must match the key for security system to work
