0
What else can I help you with?
2005 silverado dash lights flicker?
why do my lights flicker and interior lights flicker
1998 Chevrolet s-10 headlights and dash lights flicker?
I had this problem and it was a bad alternator.
What do the warning lights on the dash of a 1998 Toyota rav4 mean?
The warning lights on the dash of a 1998 Toyota Rav4 can mean anything from low fuel to brake problems or overheating. Each light has a unique image which denotes the specific problem.
1998 dodge cirrus dash lights don't work but other lights do?
Check the dimmer knob. If that isn't it. Check your fuse. Might not be the problem, but it's a place to start
How do you fix your lighting problem with your 94 Chevy Cavalier Z24 you have no tail lights dash lights or parking lights?
how do you fix your lighting problem with your 94 chevy cavalier z24 you haveno tail lights dash lights or parking lights
Why don't my Dash lights work 99 silverado?
Well its possible the lights are blew or the wires aren't hooked up right.
1998 navigator instrustrument cluster and ac cluster not working?
My dash lights went out and the cause was a bad alternator. new alternator fixed the problem
How do you get your dash lights to go off when they stay on and the car is off?
So what is the problem with my stupid car with the lights on the dashlight problem?
Why won't my Dash lights come on?
Dash lights may have problems coming on because there is a problem with the dash fuse. It is important to get a specialist to check the wiring and the fuse status.
You have no dash lights at all in your 1989 s10 blazer what could be the problem?
If you have no dash lights at all on your 1989 S10 Blazer, a blown bulb can be the problem. You should also check the fuse.
Where is the wiper relay on a 1998 silverado and where is the wiper fuse?
Under the access pannell on the drivers side of the dash
Chevrolet Silverado Headlight Switch cause the running lights and dash lights not to work but the turn signals and brake lights do?
I found this on my 1997 Silverado and found the connection from the wiring harness to the back OS the switch itself was loose, I could wigle it arouns and make the lights come back on.
