Check to see if the battery is properly grounded, if it isn't the stater won't turn because the circuit is broken.
Check fuses as the battery change should not initiate a "No Start" condition.
You disconnect your battery and then reconnect your battery again.
Disconnect your battery. Yup..It's that simple.
Try on the top of the starter - follow the + battery cable
The only thing you will have to reset is the clock and the radio presets.
timing chain or belt
The battery seems to be a problem on this vehicle. A recharge could fix the issue but a new battery may be necessary.
Could be your battery, starter, ignition, check them... would start with the battery !
To replace the knock sensors on a 2003 Chevrolet Avalanche with a 5.3L engine, first disconnect the battery and remove the intake manifold to access the sensors located on the engine block. Carefully disconnect the electrical connectors from the old knock sensors and remove them using a socket wrench. Install the new knock sensors, reconnect the electrical connectors, and reassemble the intake manifold. Finally, reconnect the battery and start the engine to ensure proper operation.
how do you change an alternator on a 2003 chevrolet suburban?
The 2003 Chevrolet Malibu has 12 valves.
The 2003 Chevrolet Express has 12 valves.