Watts = Volts x Amps. Como você pode ver pela fórmula que você precisa saber o que a tensão é.380vottos
To calculate the current in amps from power in watts and voltage, you can use the formula: Amps = Watts / Volts. Therefore, for 200 watts at 240 volts, the calculation would be 200 watts / 240 volts = 0.8333 amps. So, 200 watts is approximately 0.83 amps at 240 volts.
To convert watts to amps, you can use the formula: Amps = Watts / Volts. In this case, to convert 200 watts at 12 volts to amps, it would be: 200 watts / 12 volts = 16.67 amps. So, 200 watts at 12 volts is approximately 16.67 amps.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
Zero. Watts is the product of Amps x Volts. As you can see an amperage value is needed. Voltage = Watts/Amps. Volts = 200/? 20 volts
The formula you are looking for is I = W/E. Amps = Watts divided by Volts.
I may be wrong, but I think you can calculate it by: Watts = Volts x Amps So: Amps = Watts / Volts Thus, if you're running them on a 240 volt circuit, it resolves to: A = 200 / 240 = 0.83 Amps
You need the volts times the amps to equal 100 Watts. On 12 v that is 8.33 amps, or on 200 v is it 0.5 amps.
Amps x volts equals watts...200 amps at 12 volts would be 2400 watts...add a few more because. the inverter efficiency is not 100 percent...
The number of amps cannot be determined from just the energy in joules. To calculate the current in amps, you would need to know the voltage of the circuit as well. Amps is equal to power (in watts) divided by voltage.
There are many different alternators on vehicles today -(and you haven't even told us WHAT vehicle). Most modern alternators can produce at least 800 watts, many up to 2,000 watts.
Look at the back of your fridge and find the plate that tells you how many amps it needs. Once you have Amps you multiply that number by the Volts coming out of your plug (usually 120v) and you will get Watts. So once more: Amps x Volts = Watts
it's depend how many volt power you connect ..such as if you connect 200volt ac line consume 1 amps