answersLogoWhite

0

No they are all different.

Fog lamps- usually owner installed and are located low on the front of the car to illuminate the road directly in front of the vehicle well when fog restricts distance vision.

turn signal- located on front fender and visible from both side and front of vehicle, usually just below the headlamps and are used to indicate your intention to turn. they are on a flasher relay.

Daytime running lamps, a secondary bulb in the headlamp that is not as bright and is as of 2000 mandatory in most states. It is used to increase visibility of the vehicle, and to bridge the gap between night and daylight or dusk.

None of these will operate on the same circuit as each other.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Does a 89 Chevrolet 20 van have daytime running lamps?

No.


What does drl in the dashboard mean?

daytime 'running' lamps/lights.


What is fuse 10 DRL?

DRL stands for Daytime Running Lamps.


Daytime running lamps not functionin?

i must recomend that you check th fuse located under the hood that says something bout running lamps


What is the 15 amp drl fuse on a 1996 mercury?

daytime running lamps


Where is DRL Daylight running light located for Acura 1990 integra?

i am pretty sure there are no daytime running lamps on a 90' integra...


How do you turn off the daytime running lamps on 1996 vitara?

Lift the E-brake one click


When is it that the law required you to have on your lights?

On at Dusk and until Dawn. All new cars are equiped with DRL (daytime running lamps).


What is the fuse location for a 1996 Ford Thunderbird daytime running lamps?

FUSE BOX located above brake pedal driver side.


Where is the location of fuel pump relay on 96 blazer?

behind glove box access door along with the daytime running lamps, ect


Why does my 1996 explorer running lights stay on?

If you are referring to the daytime running lamps (DRL) on Canadian Explorers not turning off when the parking brake is engaged, I believe that is a defective DRL module.


How do you turn on daytime running lamps on 2005 BMW X3?

To turn on the daytime running lamps (DRLs) on a 2005 BMW X3, ensure the ignition is in the "on" position. Then, set the headlight switch to the "AUTO" position, which allows the DRLs to activate automatically when the vehicle is in motion. If the DRLs do not turn on, check the vehicle's settings and ensure that the DRL feature is enabled in the vehicle's onboard computer.