There can be several things that will an automatic transmission not to work properly. The most common cause is a lack of Transmission Fluid. Broken shifting linkage can also cause the problem.
Your transmission needs to be rebuilt ... although - once - I "fixed" that problem by draining & refilling my trany.
If you have an automatic transmission then either the linkage is fouled up or you got a internal problem. That's 100 vrs about 3000 dollars.
If you have an automatic transmission, it probably has a forward clutch/band problem.
what is the problem when the car will not go in drive or reverse? and the transmission fluid is still full
until you face a wall.
I had that in a vehicle i used to drive, and they had to replace the whole wiring system inside the transmission
Absolutely not.
yes
There clearly is a problem with your transmission
your transmission is about to go, usually reverse goes first
1999 ford ranger has reverse, 1st and 2nd no drive , reverse quits when it gets warm , can you help diagnose
If a 1992 Toyota Paseo's automatic transmission is only shifting into reverse and neutral but not drive, it may indicate a problem with the transmission fluid level or condition, such as being low or contaminated. Additionally, issues with the transmission linkage, a faulty valve body, or internal transmission problems like worn clutches or bands could also be the cause. It's advisable to check the transmission fluid first and then consult a mechanic for a thorough diagnosis.