yes it can if not installed properly u will need a good after market alarm installer who knows about the cars electrical systems and compatibilities . my 02 montecarlo after market alarm has gotten rewired 3 times because of several issues my sensors would light up as well as my trunk would open on its own alarn would go off on its own. ect i can go on forever...
There isn't one. The alarm is part of the body control module programming and can not be disabled.There isn't one. The alarm is part of the body control module programming and can not be disabled.
I unplugged the alarm control module from the large connector in my Camry 97. It did start afterwards.
The lighting control module handles Auto lamp, Auto Dim, Illuminated Entry, and (95-97) Alarm System functions, among others.
On a 1994 VW Golf, the alarm can be turned off by disconnecting the smaller of two connectors coming from the Comfort Control Module. The Comfort Control Module is located behind the dashboard, to the left of the steering column.
BCM, body control module. It controls lights, wipers, alarm, etc. PCM, powertrain control module. It is the engine computer.
Wipers, door locks, lights, alarm if equippedWipers, door locks, lights, alarm if equipped
Lights, locks, parts of the AC system, gauges, alarm, wipers, ...........
To reset the alarm on a 1998 Chrysler Sebring, you will typically need to locate the alarm system's control module. This module is often found under the driver's side dashboard or near the fuse box. Once you locate the control module, you may need to disconnect the battery for a few minutes to reset the alarm system. Reconnect the battery, and the alarm should be reset. If this does not work, consult the vehicle's manual or a professional mechanic for further assistance.
Short VTSS Disarm Sense to ground, on the Body Control Module.
Wipers, interior lights, exterior lights, alarm, some of the hvac system,.......
it is not an alarm module it is called a G.E.M. module,and it located behind the radio in the dash.and to replaced it has to be reprogrammed
As I know it is for electric windows, electric dooor locks and alarm. Might also control interior lights.