0
What else can I help you with?
Why do brakes make noise when wet?
When brakes get wet, the water can cause friction between the brake pads and rotors, leading to noise.
What causes a grinding noise on the front end of a 2004 ram 4x4?
this could have MANY answers, but the most common is worn out brake pads rubbing against the rotors.
What is wrong if the brake pads on a 1998 Ford Contour are fine but still make a slight metal rubbing noise?
if you didnt turn the rotors they will do that until they wear into the grooves
Do brake rotors need to be replaced if there is no noise shimmy or other brake issues?
When Brake Rotors Are To Thin To Turn On A Brake Lathe To Have The Minumn Thickness. They Need To Be Replaced.
Is there a rumbling noise when you brake with warped rotors?
There can be. Only way to know is have your brakes and rotors inspected.
Car makes a noise like metal rubbing together but is better in high gear?
If a car is making a metallic rubbing noise, but it is better in high gear, it could be a problem with the brakes or rotors. The brake pads might be so worn that they are touching metal to metal with the rotor.
Why does your brake pedal vibrate and a grinding noise when braking only when coming to a stop?
The brake pads or brake shoes are worn and rubbing against the rotor or drum, Disc brakes use brake pads and brake drums use brake shoes. Need to get them replaced before they cause too much damage or you will wind up with repairs or replacement of the rotors or drums also.
When you break your car makes a knocking noise?
warped rotors , brake
What would cause the wheel to make noise when braking?
The most common reason for a wheel to make noise when you brake is the brakes needing replacement. When the brake pads or shoes wear down, the metal scrapes against the metal on the drums or rotors, causing noise.
What would be the cause of scrapping noise coming from brakes when the brake is not applied?
you need to replace your brake pads. if you don't, in due time, they will wear down and put grooves on your rotors and that is NO bueno.
What would cause a sort of rubbing noise like low brake pads on the rearend of a 1998 Chevy S10 after replacing both bearings?
Low brake pads, misassembled brake parts?
What could cause a screaching noise from a wheel?
check your brake linings they have little metal tabs that will rub the rotors when they are bad. could be a wheel bearing
