Yes, because the tire gets hot and this causes the tread to wear faster.
You can change the chain sprockets of most motorcycles to get a higher top speed. Reduce the rear sprocket numerically, and/or increase the front sprocket numerically. A higher profile tire will also increase top speed slightly.
tires are made of rubber and rubber can cause friction
It is an indicator of tire tread wear.
most likely popped tire belt feel tire tread with flat palm slowly carefully for noticeable dip or bulge in tire tread if you feel anything noticeable then the tire has lost a steel belt inside junk. it happens.,..
That's a rating for how well the tire tread wears - the higher the rating the more miles you can put on the tire before it needs to be replaced
To increase friction in a bike, you can adjust the brake pads to make better contact with the wheel rims, use tires with a higher tread pattern for better grip on the road, or reduce tire pressure slightly to increase the surface area in contact with the ground.
If you mean tire tread depth, the minimum is 1.6mm.
The tire speed ratings are used to tell drivers the top speed that a tire can go. Speed ratings are generally much higher than legal speed ratings.
Tire spec in PA is 2/32 of an inch of minimum tread
Minimum LEGAL tire tread depth is 2/32nds of an inch.
1 mm on whole tire. If any part of tread is less then it should be replaced.
NASCAR tires do not have tread because the cars do not drive on a wet surface. Tread helps channel water away from the surface of the point where the rubber meets the road. Since NASCAR does not race in the rain, a smooth tire gives more surface for the tire for the most traction and speed.