Yes, you can use SAE 10W-30 engine oil in a 1999 Chevrolet S10, as it is suitable for many vehicles, especially in moderate climates. However, it's always best to consult your owner's manual for the manufacturer's recommended oil specifications to ensure optimal performance and protection for your engine. If your S10 has high mileage or is used in extreme temperatures, you might consider oils specifically formulated for those conditions.
sae 5w-30
Engine oil: depending on mileage- for my s10 w/ 115000 miles I use 10w-40. If you live in a colder climate you may want to use 5w-30.
Need to know what year S10 and what engine size to tell you how many quarts of engine oil it takes.
The Chevrolet S10 was built over many years. The exact motor oil capacity is dependent on year and engine type. The final production year of the S10 with the S10 pickup with the 2. 2L 4-cylinder was 2003. The 2003 had an engine oil capacity of 4. 5 quarts including the filter.
A 2001 Chevrolet S10 2.2 liter engine will hold approximately 6 quarts of oil. The recommended oil type is 10 W 30.
The oil drain for the engine is located at the lowest point on the bottom of the engine oil pan.
The oil filter on a 1987 Chevy S10 truck is located on the bottom, right side of the engine. It is positioned on its side to allow for easy removal and replacement. If the S10 truck is a 4+4 with the 4.3 engine, the engine oil filter would be accessed from the top, under the hood in the drivers side front corner of the engine compartment.
AnswerThe engine oil drain plug is located at the lowest point on the engine oil pan.
If that S10 has a 4.3 engine, I find it best to remove the distributor to gain better access to the oil pressure sensor.
Change the oil every 3k miles.
Engine oil, 4.5 qts with filter change.
Chevy S10 pickup 4cly 2.5 engine,how to change rear oilseal