answersLogoWhite

0

Make sure thatit is isolated from other electrical components

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Do you hook up positive or negative first?

Hook up the positive first then the negative.


How do you stop the battieriess from reversing polarities when the batteries are in series?

In a negative ground system, hook the vehicle ground (frame) to the negative of the first battery, positive of that battery to negative of second battery and the positive of the second battery back to vehicle positive. ( starter or starter solenoid) If you are hooking 2 12 volt batteries in series you will have 24 volts.


How do you jump start a 2000 intrepid?

there is a small box where the battery would be that you hook the positive to and you can just hook the negative to anything that would ground it


When welding with DCEN the electrode is positive and the work is negative?

DCEN means Direct Current Electrode Negative. Hook the welding cable to the Positive connection (+) on the machine, the ground cable to the Negative connection (-) Electricity travels from Negative pole to Positive pole.


How do you hook up a 6 volt positive ground ignition coil on a 1949 ford tractor?

To hook up a 6-volt positive ground ignition coil on a 1949 Ford tractor, first ensure the tractor's battery is disconnected. Connect the positive terminal of the coil to the ignition switch, and the negative terminal to the distributor. Make sure the battery's positive terminal is connected to the chassis ground, as the system operates on positive ground. Finally, reconnect the battery and check for proper spark when cranking the engine.


How is the battery trminals hook up positive to positive or negative to positive?

Positive to positive, negative to negative if you are asking about installing one battery in a vehicle.


Proper hook up of jumper cables to a semi truck?

Depends on what year it's from. On an older truck, hook the positive to a positive battery post, hook the ground to a bolt which goes through the chassis. On a newer truck, which is apt to having chassis-mounted electronics, put the ground to the negative battery terminal.


How do you hook up battery to auger engine?

Positive to positive and negative to negative. The negative will be connect to the engine or chassis. The positive will be connected to the starter.


How do you hook up 4 batteries on a 12 volt positive ground system?

Not an answerable question Missing type of batteries, and application.


Where do jumper cables hook up to on the 96 Aurora?

Positive is connected to the positive terminal on the battery and negative is connected to a ground point on the engine away form the battery. Under the Hood, on the passengers side, is a positive terminal with a red plastic cover. Put your ground on a metal part of the engine. No need to pull up the back seat to hook to the battery.


How do you jump start a Chevrolet cobalt by engine?

Under the hood on the driver side is a fuse/relay box with a rod sticking out. This is where you hook the positive. Above that on the suspension is a spot to hook the negative but it can hook to basicly anything metal that provides a ground to the car


Could someone help with changing from positive ground to negative ground on Nash metropolitan?

Negative ground systems are basically the same in general as a Positive system. So you should be able to just get a regular battery and just hook your black cables (NEG) to the positive and red cables (POS) to the negative. So basically, just swap the coloring and put a regular battery in it. That's all we've ever done with the old systems that have came into our shop, and we're going back to plain Jane 1932 Plymouths and others like that.