0
Yes, you can remove v-brake prongs if they are no longer needed or if you're switching to a different braking system. However, it's important to ensure that the frame or fork is compatible with the new brake type, as removing the prongs could affect the structural integrity or functionality. If you're unsure about the process, it's advisable to consult a professional bike mechanic for assistance.
What else can I help you with?
How do you remove the cigar lighter on a rover 75 so that i can fit a new one?
A cigarette lighter on a Rover 75 is held on using prongs on the side of the lighter. To remove it pull the prongs inside the lighter and pull is off. Be sure to remove the wiring from the rear.
How do you remove a wood burning fireplace?
Use metal prongs for a fire place because if you get normal ones they will burn.
What are prongs on a stag?
Prongs are the points on a stag's antlers.
Why does your heater have 2 prongs not 3?
My heater does not have 2 prongs.
How do you remove bulb from spring loaded holder on 2003 Corsa?
Easy mate, there are two prongs bent into position which hold the bulb in place get hold of the projecting bump on one of these prongs and push it towards the light it will pop and release the bulb in a flash.
How do you use the word prongs in a sentence?
Use the prongs to move the charcoal.
What does the turn signal relay for a 1995 Pontiac Grand Prix look like?
it's usually black and 1inch by one inch, with four prongs or 5 prongs. It is located under the hood on drivers side. you must remove one brace to get to the relay.
What is an example of the word 'prong' in a sentence?
A fork has prongs at the end of it. (Actually a fork has tines. A plug has prongs.)
How do you remove brads from pants?
To remove brads from pants, start by using a pair of pliers to gently grip the brad's prongs on the inside of the fabric. Carefully bend the prongs upward until they are straight, then pull the brad out from the front. If the brad is stubborn, you can use a seam ripper or a small flathead screwdriver to help ease it out. Always handle the fabric carefully to avoid causing damage.
The 80A Fusible Link next to the battery on your 1989 Corolla is blown how do you replace it?
On my 1987, you just pull up on the fuse. Yet on other models I have noticed that the fuse and its (2) prongs are of the same. what I mean is that if you undo the positive terminal to where this fuseable link is attached too. Turn the wire to where you can see the two bolts. you must completely remove these bolts from each side. To remove the copper wire from its plastic case, push downward on the copper prongs from the top veiw. They should come out easly. Then with a "new" fuse(one with these prongs attached)push downward thru the top of the plastic ( be carefull while pushing as prongs will easliy bend and or break).Make sure that the prongs are going into each in their own slot . re- install bolts then attach to battery. Your done.
Where is the 1999 Breeze flasher location?
remove the top of the steering comumn , it is located in the back it is a square black box that pulls straight back and out it has 5 prongs
Do speaker bezels pop off on 2001 Chevy Tahoe?
You have to remove the door panels first and then bend the prongs back and they will come out of the door panel. You cannot remove the speakers until the door panel has been removed.
