Easy mate, there are two prongs bent into position which hold the bulb in place get hold of the projecting bump on one of these prongs and push it towards the light it will pop and release the bulb in a flash.
Remove the lense from the car then you will find a holder with all the bulbs in. change which ever bulb
No, the clock spring is a connector and is not considered an active sensor.
There is a plastic cover that screws into the headlight housing turn it anti-clockwise to reveal ur h/l bulb. Remove the plug 1st then unclip the spring!
hi i need to now how to change the fuel pump on my vauxhall corsa 1.4 thanks steve
easy remove 4 screws securing top of grill. remove 2 screws holding inner wheelarch to bumper. bumper cannow be unclipped. remove 3 screws holding headlamp jiggle lamp free enough to gain access to bulbs 2012 corsa
main relay box and fuse holder assembly is under the bonnet,left side.
break the player
To drain the coolant system on a 98 Corsa, locate the drain plug under the radiator. Remove the plug and catch the run-off in a pan.
To replace the back indicator bulb in an Opel Corsa, first, ensure the vehicle is turned off and the keys are removed. Open the rear hatch and locate the tail light assembly; you may need to remove screws or clips to access it. Once exposed, twist the bulb holder counterclockwise to remove it, then pull out the old bulb and replace it with a new one. Reassemble the assembly, ensuring it’s securely fastened, and test the indicator to confirm it’s working.
To access the RH side rear light bulb cluster on a Vauxhall Corsa, open the rear hatch and locate the access cover on the inside of the rear light assembly. Remove the cover by unscrewing any screws or clips if present. Once open, disconnect the wiring harness, then twist the bulb holder counterclockwise to remove the bulb cluster. Replace the bulb as needed, reassemble the components, and ensure everything is securely fastened.
Remove the EGR valve from the Corsa. Wash the EGR valve with carburetor cleaner. Make sure that the valve is clean of gunk and let it dry. Reinstall the valve.
i think you just take em off lisa.