NO. With the wrong oil, you will blow the seals. Your local dealer will have the right oil.
Actually this answer is WRONG! You can use synthetic ATF oil as a substitute, and in the opinion of lots of ppl who have done this substitute, it IMPROVED their ride! Go for it, if you dont like the ride, drain the ATF and fill with whatever was in there before!
Any light machine oil, including motor oil in a pinch.
It takes 5.6 oz of fork oil in each fork.
qt fork oil and type oil for the front fork on each side
The fork oil capacity for the Honda ST1300 is approximately 15.5 ounces (or about 460 milliliters) per fork leg. It's important to check the owner's manual for the specific model year for any variations. Additionally, when changing fork oil, ensure to use the recommended oil type and viscosity for optimal performance.
vl250 fork oil quantity
Both are correct, you can say substitute for or substitute with.
The fork oil capacity for a 1984 Yamaha YZ80 is approximately 220 milliliters (7.4 ounces) per fork. It's essential to use the recommended oil type, typically 10-weight fork oil, to ensure proper performance. Always check the owner's manual or service guide for any specific details or variations.
the front fork oil leval is to be set at 130mm from the top of the fork (air gap)..with the fork spring out ..and the fork fully collapsed ....
r1 fork oil capacity
400cc 5wt fork oil
fork oil amount yamaha thunderace
To add fork oil to a 1981 Honda Goldwing, first, ensure the bike is on a level surface and securely supported. Remove the front wheel and brake components, then take off the fork caps and drain any old oil. Using a fork oil level gauge or measuring device, pour the recommended type and amount of fork oil into each fork leg, typically around 10-12 ounces depending on the model. Finally, reassemble the fork components, ensuring everything is tightened properly before reinstalling the front wheel.