Yes, you can use a 13 amp fuse for a table lamp, but it is usually not necessary or recommended. Most table lamps are designed to operate with a lower fuse rating, typically 3 to 5 amps, which provides adequate protection for the lamp's wiring and components. Using a higher-rated fuse may not trip in case of a fault, increasing the risk of fire or damage. Always check the manufacturer's specifications for the appropriate fuse rating.
Yes, you can use a 5 amp fuse instead of a 4 amp fuse in a lamp, but it is not recommended. The purpose of a fuse is to protect the circuit by breaking the connection if the current exceeds a specific limit. Using a higher-rated fuse may allow excessive current to flow, which can lead to overheating, potential damage to the lamp, or even fire hazards. It's always best to use a fuse that matches the recommended rating for safety.
1amp 3 max depends on what rating lamp it is (or bulb).
A table lamp with a 60 w bulb uses ¼ amp on a European 240 v system, or ½ amp on an American 120 v system.
NO! Using a larger amp fuse defeats the purpose of the fuse to protect the wiring in the circuit. This can cause a fire. Always use the correct amp fuse for that circuit.
NO! Using a larger amp fuse defeats the purpose of the fuse to protect the wiring in the circuit. This can cause a fire. Always use the correct amp fuse for that circuit.
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
A fuse is given a various rating (strength). For instance, a home appliance (washing machine, etc) would usually have a fuse with a 13 amp rating. While a low powered lamp would only merit a 2 or 5 amp fuse rating. It is important to use a fuse of the correct rating in amps for each electrical appliance.
The recommended amperage for a fuse to use with a device that requires a 2.5 amp fuse is 3 amps.
This is a unclear question, and not easy to answer. In your fuse panal, their will be a range of fuses, from 5 amp, up to 30 amp. On your fuse panal cover, should be a digram of your fuse panal, and which amp fuse goes into which slot.
No. If you use a larger fuse you are not protecting the device which has a rating of a lesser value.
NO! The use of a higher rated fuse than is recommended can cause the wiring to overheat and cause a fire. Use exactly what is required.
For a heat lamp, it is recommended to use a ceramic fuse rated for the specific voltage and current requirements of the lamp. It's important to match the fuse rating to the electrical specifications of the lamp to ensure safe operation. If you're not sure, consult the lamp's manual or contact the manufacturer for guidance.