To change the center console light in a 2004 Buick Regal, first, ensure the vehicle is turned off and disconnect the battery for safety. Remove the center console cover by unscrewing any visible screws and gently prying it off to access the light bulb. Replace the burnt-out bulb with a new one, ensuring it fits properly, then reassemble the console and reconnect the battery. Test the new light to confirm it works before finishing up.
tap your feet together and say theres no place like home three times
what do you have to do to change the center brake light
Any body know the answer to this....I got the cover off of the console but don't see where the light bulb is.....I see wires running up underneath but not a good way to get at them to see if light bulb is attached.
The shifter light on the center console of a 1999 Honda Civic can be reached by removing the center console assembly. Loosen all of the proper screws and pull off the assembly. Once the bulb is visible replace the unit using an appropriate sized bulb.
How to change light blub in console on a Ford F150.
Toyota Camry 1999 model - replacement of interior console light
There is a small light under it. Remove the console and change the bulb. If the console doeswn't come off easily, there is still a hidden screw somewhere. Hint: there are screws under the console cup holders.
See "Related Questions" below for instructions on removing it - I seem to recall once you get to about step 2, the lightbulb should be accessible.
To change the map light in a 2005 Town and Country, first lower the sunglass holder. Remove the single screw holding the console and firmly pull down the entire console from the rear. It will release the two clips allowing the entire console to be removed and the map light can be changed.
The answer for this question can be found here: http://www.2carpros.com/forum/1998-volvo-v70--center-console-vt162248.html
To change the gear shift light in a 2006 Toyota Matrix, first disconnect the negative terminal of the battery for safety. Remove the gear shift knob by unscrewing or pulling it off, depending on the design. Then, carefully pry off the center console cover to access the light bulb socket. Replace the old bulb with a new one, reassemble the console and knob, and reconnect the battery.