no
China
All Toyota Camry's have struts in the front. This is also accompanied with strut mounts and bearings that are located between the mount & strut. I highly recommend replacing the mounts & strut bearings with the struts. My experience has shown that the mounts fail before the strut.
Shock absorbers or strut assemblies.
replace the mounts
To replace the front strut mounts on a new Corsa, begin by safely lifting the vehicle and removing the front wheels. Next, detach the strut assembly by loosening the bolts securing it to the steering knuckle and the top mount under the hood. Replace the old strut mounts with new ones, reassemble the strut assembly, and ensure all bolts are tightened to the manufacturer's specifications. Finally, reattach the wheels and lower the vehicle.
It could be your front strut mounts need to be replaced. The rubber inside the strut mounts, wears out. You will hear the noise when u drive over bumps and uneven surfaces. my 2004 grand am se1 4 door ,with the 3.4 v6 engine and automatic transmission, needs the front strut mounts replaced.
try to tighten all the bolts on the strut mounts and double check
There is one on the front passenger side and a torque strut on the front. The torque strut acts like a motor mount.
could be struts and or strut brg plate that mounts the strut at the top
4 engine mounts. front right, front center, torch strut that supports the radiador, & transmission mount
The?ætorque strut mounts help keep the engine and the transmission in place and reduce vibration. There are?ætwo visible bolts that connect the strut to the car structure. Unscrew the nuts and use a hammer to get them off.
TVs rarely come with mounts.