0
In a belt drive system, the gears do not move in the same direction. When one gear (the driver) rotates, it causes the belt to move in one direction, which in turn makes the other gear (the driven) rotate in the opposite direction. This is due to the nature of how belts wrap around the gears.
What else can I help you with?
What is a idler gear?
It changes the direction of movement in a gear system, so that the driver and driven gears move in the same direction.
What method is used to tension the drive belt?
Move a pulley
There are 3 gears.The gear on the right moves to the left and the gear on the left moves to the right.In which direction wil the gear in the middle move?
Gears move about an axis, which means they can only move clockwise and counterclockwise, not left or right. That said, if you have two gears, made to rotate by a motor in opposite directions, and interconnected by a chain of an odd number of gears, then the two motors would work against each other. Depending on the strength of the motors, gears, and axles, the mechanism will either break, not move, or move in the direction forced by the dominant motor.
Does Genie only make electric garage door openers?
Genie does in fact only make garage doors. However, they make garage doors with different opening technologies. Their openers consist of the Screw Drive, a technology to open a garage door without the use of chains, gears, or belts, the Chain Drive, which uses a chain to move the garage door on its track, and the Belt Drive, which uses the same concept as the Chain Drive but with a belt in place of the chain.
How does an escalator moves?
An escalator moves by a continuous loop of rotating steps propelled by a motor. The motor turns the gears that drive the steps in either direction, allowing passengers to move up or down effortlessly. The handrails move at the same speed as the steps to assist passengers in maintaining balance.
How do cars move in reverse?
If the car is facing up a hill, simply put the car in nuetral. :D When placed in "reverse" an extra gear is added to the chain of gears in the transmission which causes the final drive to the wheels to turn in the opposite direction.
Your riding lawn mower is running but won't drive a belt broke on it but i didn't think a belt made it move why?
Most riding mowers are driven by a belt.
How do you get the accessory drive belt or serpentine belt off of a 1989 sunbird?
To remove the accessory drive belt or the serpentine belt from the motor on a 1989 Sunbird, it is necessary to loosen the belt tensioner. Look for a pulley that has a bolt in a slot. Loosen the bolt and move the tensioner so there is a gap in the belt. Then remove the belt from each pulley.
When one gear turns another do the gears turn in the same direction?
No, while one gear is turning the other the other gear should move the opposite direction. I learned this in robotics class.
I drive a 2005 Kia Sportage with a 5-speed transmission. The other day the gears locked and I could not move. What is wrong?
no oil in trans
What is a meaningful sentence for the word clutch?
When Dee learned how to drive with a stick shift, the manual action of the clutch helped him move between the gears.
How do you release serpentine belt tension on 1986 Chevy Celebrity?
On the belt tensioner you will see a spot to insert a half inch drive breaker bar or ratchet to move tensioner off belt.
