Yes
You change the 2008 silverado oil transmission whenever you take it for service.
Do it yourself engine transmission flush and filter change on 2005 Chevy silverado 5.3?"
What is best brand atf for 1997 silverado pu
Remove the transmission oil pan for access to filter
The transmission must be removed to change the flywheel.
Depends on the model of the truck
which trans automatic or stick 4x4 or 2 wd ?
YES. You may have to change the yoke on the driveshaft. You didn't say what size transmission that is in it now.
The speed sensor on a Chevy Silverado is located on the tailshaft of the transmission. To remove it, unplug the wire hardness, unscrew the bolt holding it in place, and pull it out.
700R4 from 1986 to 1992 should work
The v-8 and v-6 transmission bell housings are a different size and you can't change the bell housings. So no. won't work.
If the 95 is a 1/2 ton, Then it must have the 4L60E transmission put in it. If the 95 is a 3/4 ton, Then it MUST have the 4L80E transmission put in it. 4-wheel and 2-wheel drive transmissions will NOT INTERCHANGE