Power Steering pulley is pressed on. to remove pulley, u need to completely remove pump from vehicle and take it to a mechanic that has right tools for removing
On a 1988 Chevrolet S10 pickup, the Engine Control Module (ECM) is typically located under the dashboard on the driver's side. It is mounted on a bracket near the steering column, often behind or above the fuse box. You may need to remove some panels or covers to access it.
Sometimes you have to remove the pump to get to the fitting on the pump.
Just below the steering wheel tube and off to right there should be a connecter for diagnostic plug.
One of the links in the search below should help.
You can use any SAE certified power steering fluid in your 2003 Chevrolet S 10 pickup truck. The power steering fluid usually comes in a pint bottle.
What is the gear ratio for a 1985 CHEVROLET K10 pickup
To power the steering pump off a Chevrolet Cheyenne half-ton pickup with a 350 engine, first, ensure the vehicle is turned off and disconnect the negative battery terminal for safety. Next, locate the power steering pump, typically mounted on the front of the engine, and remove the serpentine belt by loosening the tensioner pulley. Disconnect the power steering lines and any electrical connectors if applicable, then unbolt the pump from its mounting bracket and remove it from the engine. Always refer to the vehicle's service manual for specific instructions and torque specifications.
Flasher Relay is located Front seating area, driver side, under dash, driver side of steering column, mounted in relay bracket.
i need to find where they hide the horn on my 2006 Chevrolet half ton pickup.
No, a GMC pickup has a higher towing capacity, and is just light years better than a Chevrolet. Overall, buy a GMC!
yes it should bolt right up Chevrolet changed everything in 1995
= What is the automatic transmission fluid capacity for a 1994 Chevrolet 1500 pickup? =