answersLogoWhite

0

new pads should come with caliper grease. You dont need to use the grease but if you dont your brakes will like to squeak. It goes between the metal side of the pad and the caliper. If you dont have the grease some high temp grease will work fine.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Do you need to drain brake fluid when changing brake pads and rotors?

no


Would changing brake shoes on 1996 Explorer stop the squeaking noise?

Yes if the squeaking is from the wear indicators on the pads, if the pads are fine then the brake parts need to be lubricated, a little silicone grease on the pistons and sliding parts will stop the squeak.


Is there somewhere I can get instruction on changing brake pads?

If you want to know if there is somewhere you can get instruction on changing brake pads because you need your brake pads changed, then the answer would be yes.


What tools are needed to change the front and rear brake pads on a 2003 Mitsubishi Eclipse GT?

You will need a hoist, a socket wrench set and a torque wrench. You will also need the brake pads, brake fluid and brake grease.?æ


Do you need to put new brake fluid in after changing the front brakes?

No


Do we need to bleed when changing brake pads for 2003 Toyota Corolla NZE121?

If you're only changing the pads, no. You only need to bleed if the hydraulic system was opened or if you wish to flush/change the brake fluid.


Do you need to reset computer when changing brake pads on a 2002 Nissan Maxima?

Yes


Do you need a torque wrench when replacing pads and rotors?

You do not need a torque wrench when replacing brake pads and rotors. Some of the tools needed to change the rotors and pads are the c-clamp, sockets, wrench, grease, and brake cleaner.


Do you need to disengage emergency brake when changing rear disk brakes on a Saturn SL?

Yes, you do.


What tools you need to install brake pads on a 2001 gmc sierra truck?

To install new brake pads on this truck, you will need several items. You will need blocks for the tires, a jack, a lug wrench, a socket set, jack stands, and some grease.


The emergency brake stopped working after changing the rear rotors and pads in a 1995 through 2001 Ford Explorer?

They either need to be adjusted or they were not properly reassembled. See the related article for adjusting and changing this brake.


What does it mean when the brake ligh comes on in a Toyota carolla?

Handbrake needs adjusting or brake pads need changing but i'd look at the handbrake first.

Trending Questions
What are the intake manifold torque specs for 2001 F150 5.4? When should you use overdrive? Can a battery be charged while remaining connected to the car battery cables? How can you tell if the oil pump is working properly if the oil pressure warning light flashes and than goes off in 2000 VW Paasat? How do you remove the front hub and bearing from a 2002 Dakota The bots are out and the axle nut is removed but it is stuck? 1995 Dodge ram 2500 starts and runs fine But it sometimes won't crank at all when the engine is hot or warm But it would start again after 5-10 min wait Battery starter wires are good help? What kind of transmission fluid is recommended for a 1999 Dodge Durango? How many quarts of transmission fluid does a Muncie M21 require? How do you change 07 accord hybrid engine air filter? Should you take your spark arrestor out? Your 2002 ford escape's check engine light came on and the mechanic said the egr valve needed to be replaced after replacing the egr valve the check engine light came back on within the next 20 miles? Can you mix synthetic and regular oil in a gas engine? Why is the braking distance longer when the tires are worn out? Can you cross reference a kawasaki 11013a to fram air filter? What is the scientific name for Biodiesel algae? How do you replace a timing belt on a 91 mercury carpi 1.6 turbo w ac and manual transmission? What is value of High Standard 22 cal 9 shot R-101 revolver? How do you fix fuses blows in a freight liner? What is 5w's? How do you replace a speed sensor on a 1996 Hyundai Accent?