0
What else can I help you with?
Do you need special tools to change rotors on 2001 jeep Cherokee?
To change the rotors on a 2001 Jeep Cherokee, you typically need basic automotive tools such as a jack, jack stands, a lug wrench, and various socket and ratchet sizes. Additionally, a brake caliper tool may be helpful for compressing the caliper piston when replacing the pads. While no specialized tools are strictly required, having a torque wrench for properly tightening bolts can ensure safety and proper installation.
What size torque wrench to remove seat belt buckle in 1996 ford explorer?
You don't need a torque wrench when you unscrew something.
When you change brakes and rotors on 2007 Tahoe do you need to rotate rotors?
When changing the brakes and rotors on a 2007 Tahoe, you typically do not need to rotate the rotors if you are replacing them. Rotating rotors generally refers to moving them to a different position on the vehicle, which is unnecessary when installing new rotors. However, if you're resurfacing existing rotors instead of replacing them, they may need to be rotated based on wear patterns. Always ensure to follow the manufacturer's recommendations for best practices.
What size Allen wrench do you need to change the rotors in a 1996 Cavalier?
3/8
Do you need to replace the brake pads if you are replacing the rotors?
depends on the condition od the pads. If worn or have groves etc from the rotors then replace.
Do you need to use a torque wrench to loosen retractor seatbelt bolt on vw caravelle?
You don't use a torque wrench to loosen ANYTHING. -It is only for tightening nuts and bolts to the correct torque.
How do you know if you've torqued it down enough?
You'll need a torque wrench and the torque specifications for that bolt .
Do you need a torque wrench when installing a front wheel hub?
Yes
If I want performance rotors do I need to put them on the front and back or will just new front rotors work?
The majority of the stopping power is performed by the front rotors. I would start by replacing them.
How do I change the front rotors of 1994 Honda EX?
Take it to the shop. You need air tools to remove a 181 ft-lb axel nut. As well as a heavy-duty torque wrench to tighten it back to 181 ft-lbs.
Why the stering chack when you press the break?
your rotors are probanly warped and need refinishing or replacing. Its normal.
Do you have to replace rotors when changing brakes?
Most of the time, you can get by with just replacing the pads. The rotors generally do not need to be turned if there is no pedal pulsation or vibration. Rotors will need to be replaced if the exceed the minimum thickness which is stamped on the web (area with lug holes).
