0
What else can I help you with?
When parallel parking when do you turn the blinker on?
I always turn on my hazard flashers to let the person behind know I am coming to a complete stop.
What is backing up while driving?
Backing up while driving is putting your car in reverse with your foot on the brake and slowly letting your foot off the brake. If you are pulling out of a parking spot you might turn the wheel.
How do you change a front blinker on a 2000 Pontiac Montana?
The headlight assembly has 3 screws that need removed. After removing the screws, then remove the headlight. The turn signal is located in the side light assembly. The blinker or turn signal assebly will pull forward and come out. After pulling it forward you can unsnap the wire and turn the blinker bulb, loosening it, then remove and replace. Be careful replacing the blinker assembly. There is a small part that "snaps" together when it is installed properly. If you do not install properly it will be O.K. but will not be lined up correctly.
How many feet before you turn your blinker on?
You have to put on your blinker 100ft before you turn.
How do you turn on a blinker in midnightclub la for xbox?
if you sit in the left lane for a long time the blinker will automaticly turn on
When should you use you turning signal?
When you are making a turn, when you are changing lanes, or when you are pulling away from the curb or are parallel parking. Activate turn signals 200' before making a turn.
How do you turn the blincker on for grandtheftauto4?
how do you turn the blinker on for grandtheftauto4
What makes the blinker sound when blinker is activated?
The turn signal flasher is what makes the noise and lets the turn signal flash.
Fast blinker turn signal?
often the blinker is made to blink faster when there is a bulb burned out
Your headlights will not come on If you turn the dash headlight switch to the auto position to the left then no lights come on to the right parking lights do come on and if you pull the blinker arm u?
DIMMER SWITCH FAILURE.
Ticking sound from dash?
turn your blinker of
How do you replace the blinker flasher?
To replace the blinker flasher, first locate the flasher relay, which is typically found in the fuse box or under the dashboard. Turn off the vehicle and remove the old flasher by pulling it straight out of its socket. Insert the new flasher in the same position, ensuring it is securely seated. Finally, test the turn signals to ensure they are functioning properly.
