That fuse controls the heater blower motor. That same motor is also used for the air conditioning. So if you want those to work you will need that fuse installed.
The heater fan may need a new fuse. A licensed mechanic will be able to tell you the exact problem.
Need to know which fuse u want to find out... There are quite a few different fuses in the fuse box. 10A 20A 30A, fuse for fan, fuse for Engine, fuse for horn?
You will need to drain the anti-freeze from your 1995 Mazda 626 cooling system. Remove the water lines from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
The fuse for the heater and the CD player in Honda Prelude 1988 can be found using?æa fuse diagram. The diagram is available online and can be found by looking for '1998 prelude fuse panel diagram' on any search engine.
In a 2000 Mazda Protegé, the ECU (Engine Control Unit) fuse is typically located in the fuse box under the dashboard on the driver's side. To access it, you'll need to remove the cover of the fuse box. The specific fuse for the ECU is usually labeled in the diagram on the cover or in the owner's manual, often designated as the "ECU" or "Engine" fuse. Be sure to check the diagram for the correct fuse location and rating.
The fuse box on a 1992 Mazda 929 is typically located under the dashboard on the driver's side. You may need to remove a cover or panel to access it. Additionally, there is another fuse box located in the engine compartment, near the battery. Always refer to the owner's manual for specific details and diagrams.
In a 1986 Cadillac Fleetwood, the heater fuse is typically located in the fuse box under the dashboard on the driver's side. You may need to remove a cover to access the fuses. Check the owner's manual for the specific fuse number related to the heater for accurate identification. If the fuse is blown, replacing it should restore heater functionality.
Replacement of the heater core on a 1993 Mazda Protege is going to first require the removal of the entire dashboard. Once that is removed then the heater control box will need to be removed and disassembled in order to get access to the heater core inside.
The starter relay on a 2000 Mazda MPV is located in the engine compartment fuse box. This fuse box is typically situated near the battery. To access the relay, you'll need to remove the cover of the fuse box and locate the relay labeled for the starter. Always refer to the vehicle’s service manual for precise identification and instructions.
if i remember correctly there is a heater fuse behind the glove box. you need to pull the glove box to find it.
yes but you need different motor mounts
We need to know what year the S10 is.