When starter handle moved to first stud a reduced voltage is applied
A three point starter is a device that is meant to help start a DC motor. A three point starter will start device without much starting current.
in 4 point starter we use a protactive rasistance to control the speed of motar in 3point starter speed is uncontolled
The four-point starter eliminates the drawback of the three-point starter. In addition to the same three points that were in use with the three-point starter, the other side of the line, L1, is the fourth point brought to the starter when the arm is moved from the "Off" position. The coil of the holding magnet is connected across the line. The holding magnet and starting resistors function identical as in the three-point starter. * The possibility of accidentally opening the field circuit is quite remote. The four-point starter provides the no-voltage protection to the motor. If the power fails, the motor is disconnected from the line.
1." the shunt connection in four point stater is provided separately form the line where as in three point stater it is connected with line which is the drawback in three point starter 2.In three point starter NVR (no voltage relay)is series with shunt if voltage falls certain value NVR De energized due to insufficient magnetic field and motor turned off. But in four point starter NVR energized directly from DC supply thus the draw back of 3 point starter rectified
Principal argument for deficit spending is the central point of controversy in economics.
kkkjkkll;
Satikanta Guha
The conjugated principal point is a term used in optics to refer to the point where the chief ray of a light ray bundle passes through the optical axis after being reflected or refracted by an optical system. It is also known as the focal point or image point. The position of the conjugated principal point depends on the characteristics and parameters of the optical system.
a spot on the armature that is worn to the point of starter not functioning. a replacement re manufactured starter is in order.
The principal focus of a convex mirror is the point where light rays parallel to the mirror's principal axis appear to converge after reflection. This point is located behind the mirror at a distance equal to half the radius of curvature of the mirror.
It is the point where the principal diagonals meet.
Because it has three terminals L , F and A L - Line (connected to Supply) F - Field (connected to field of dc motor) A - Armature (connected to armature of DC motor) that's y it is called 3 point starter :)