The fusible link on a Mitsubishi Eclipse is a safety device designed to protect the vehicle's electrical system from overloads. It acts as a fuse, breaking the circuit if the current exceeds a certain limit, preventing potential damage to wiring and components. Typically located in the engine compartment, these links can be identified by their distinct colors and are often specific to certain electrical systems. If a fusible link blows, it will need to be replaced to restore functionality to the affected circuits.
the fusible link is in the fuse box in the engine compartment. you will see the large fuses that should be black and yellow with a clear top piece. I just had a fusible link blow on mine and just replaced the 80amp one.
You can use tweezers or pliers. Just be careful not to crush the link while it's still in the port.
Check the fusible link coming off of the battery.
The fusible link on a Mitsubishi L200 Trojan is typically located near the battery in the engine bay, often within the fuse box or connected to the battery terminal. To replace it, first disconnect the negative battery terminal for safety. Then, remove the old fusible link by disconnecting it from its terminals and install a new one of the same rating by connecting it securely. Finally, reconnect the battery terminal and check for proper operation.
2000 Mitsubishi eclipse 2000 Mitsubishi eclipse 2000 Mitsubishi eclipse
What ever circuit that fusible link protected would be dead if the fusible link is blown.
Mitsubishi Eclipse was created in 1990.
do a 1997 cutlass olds. have fusible link
no
Mitsubishi eclipse
Where is the fusible link on a 2002 Camry, and how do I change it.
On a 1995 Mitsubishi Montero, the fusible link is typically located in the engine compartment, near the battery. It is usually found in a fuse box or along the positive battery cable. Look for a plastic cover or a group of wires leading from the battery; the fusible links are often attached there. Always refer to the owner's manual for specific diagrams and locations.