A relay does not have a fuse. The circuit for the particular relay is fused.
You can tell if the fuse is blown by testing it with an ohm meter.
You can tell if your heal lamp relay is blown is by inspecting the fuses. If you look closely at the fuse, you will be able to tell it is blown or not. If you see a separation in the fuse, it is blown.
Yes and it should be in your fuse block. Chances are that it is a relay fuse and you won't be able to tell if it is blown or not.
The fuel pump will not come on. Of course this could be a blown fuse or the pump itself has failed. Check the fuse and if it is good then install a new relay to see if that solves the problem. If not the pump is bad.
There are many ways to tell if a fuse is blown. The most obvious way of telling is if it doesn't work.
Remove the fuse and look at it. If you cannot tell if it is blown by looking at it then check it with an ohm meter.
Pull the fuse out and have a look at it and if the wire inside is broken then its blown
Unplug the refrigerator, remove the fuse and look at it. Typically the fuse will be dark in color, much the same as a blown light bulb.
To determine if a relay fuse is bad, first visually inspect the fuse for any signs of damage, such as a broken filament or discoloration. You can also use a multimeter to test for continuity; a functioning fuse will show a continuous circuit, while a bad fuse will not. Additionally, if electrical devices connected to the relay are not functioning, it may indicate a blown fuse. Always ensure the power is off before inspecting or testing fuses for safety.
Remove the fuse and check it with an ohm meter.
Test it with an ohm meter.
uh, if your tv is not working.aha
Not while it is in the fuse holder. Pull it out and if you cannot look and tell if it is blown or not, test it with an Ohm meter.