Unplug the refrigerator, remove the fuse and look at it. Typically the fuse will be dark in color, much the same as a blown light bulb.
the same as what came out
Try looking at the fuse that corresponds to the things that are not working. Take the actual fuse out of the fuse box, and look at it, examine it. You will be able to tell immediately if the fuse is blown or not by the way it looks. If it is blown it will have some gray matter or black in there.....or the fuse will look messed up, or both. Good luck to ye!
Blown fuse.
I had the same problem, I found i had a blown fuse in the fuse panel. After replacing the fuse, scanner had no problem reading or connecting with the computer on my jeep.
Check for a blown fuse.
You can tell if your heal lamp relay is blown is by inspecting the fuses. If you look closely at the fuse, you will be able to tell it is blown or not. If you see a separation in the fuse, it is blown.
Remove the fuse and look at it. If you cannot tell if it is blown by looking at it then check it with an ohm meter.
There are many ways to tell if a fuse is blown. The most obvious way of telling is if it doesn't work.
A relay does not have a fuse. The circuit for the particular relay is fused. You can tell if the fuse is blown by testing it with an ohm meter.
Pull the fuse out and have a look at it and if the wire inside is broken then its blown
Remove the fuse and check it with an ohm meter.
uh, if your tv is not working.aha
Test it with an ohm meter.
Not while it is in the fuse holder. Pull it out and if you cannot look and tell if it is blown or not, test it with an Ohm meter.
things don't work is the obvious answer.
Just remove the fuse and look at it.
I assume its because the something to do with electric doors dont work? Look for the fuse that is blown. You can tell with out removing the fuse by the visible link at the top edge of the fuse. If no visible link then blown fuse.