answersLogoWhite

0

what you need to do is is take your radio out and then take the top 4 screws out of the top of it so you are looking at the circuit board then what you will need is this program here http://www.eserviceinfo.com/download.php?fileid=1998 download that and also look at this picture http://i7.Photobucket.com/albums/y287/tone4life001pu9971.jpg

when u have the program and looked at the picture u will see that there is solder on thos 10 solder points work out where the solder is ie 3,5,6,7,8 or similar and then enter those number into the program u downloaded and press gen this will give you the code for the radio

hope this helps as its a crime that u have to do all this for a stupid code lol

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What amp is Peugeot 106 stereo fuse?

10


Where is the fog light switch in a Peugeot 106?

The fog light switch on my peugeot 106 is next too the hazard warning switch and the rear window heater switch below the stereo.


Wiring diagram and color codes for Peugeot 106?

There is not a colour code system as such on Peugeot's Near to the end of the wire is a number this is the code.


Where do you find the paint color code on a peugot 106 1997?

I read in Haynes Peugeot 106 Modifying Manual that you find the paint code on the passenger outside (I think near the window) or lift the bonnet up and the code should be at the top of the bonnet (when open) Hannah


Headlight adjustment Peugeot 106?

To adjust your headlights on a Peugeot 106, you need to find the screws to covers the headlights. Look on the chrome that covers the headlights, and if not there, check under the rim.


How do you deactivate Peugeot 106 keypad?

To deactivate the keypad on a Peugeot 106, you typically need to enter the correct code associated with the vehicle's immobilizer system. If you have the original key and code, insert the key into the ignition, turn it to the "on" position, and then enter the code on the keypad. If you don't have the code, you may need to contact a Peugeot dealer or a locksmith for assistance. Always consult your vehicle's manual for specific instructions related to your model.


Where do find the paint code on a peugeot 106 1995?

On a 1995 Peugeot 106, the paint code can typically be found on a label located in the engine bay, specifically on the front of the engine compartment or on the driver's side strut tower. It may also be present on a sticker inside the driver's door frame or on the door jamb. The code usually consists of a combination of letters and numbers, often prefixed by the letters "M."


Where is the color code found on a peugeot 106 1998?

here: http://i98.photobucket.com/albums/l251/sitlo/106%20colours/paint3.jpg


Dashboard lights on Peugeot 106?

What's the question? Yes, a peugeot 106 has dashboard lights.


How do you reset radio code on Peugeot 106?

To reset the radio code on a Peugeot 106, you'll typically need to enter the correct security code using the radio's preset buttons. If you don't have the code, you can often find it in the owner's manual or by contacting a Peugeot dealer with your vehicle's VIN. Once you have the code, switch on the radio, wait for the "CODE" message to appear, and then input the code using the preset buttons. If you enter the wrong code multiple times, the radio may lock, requiring you to wait before trying again.


Is Peugeot 106 considered vintage?

No the Peugeot 106 is not considered vintage. This is true because the Peugeot 106 was made in the year 1991. To be a vintage car you have to be around for more the 20 years


Wiring diagram and color codes for peugeot 106 stero lume?

hi, what wire colours indicate which function on a 106. Off the stereo what wires do i connect red, yellow, blue and black... plz email dgsb@blueyonder.co.uk