I have an 03 Camry as well...
Inside the trunk you will see a square section of the trunk liner material..behind the tail lamp unit...just open this small section by pulling out the small tabs...like a small fabric door.
The brake light socket is behind this.....it's the bottom one....turn the socket about 1/4 turn and it will come loose. The bulbs are a "push in" type...just pull the bulb out of the socket and replace with a new one...bulb is a "3057"
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
From inside the trunk.
Your front breaking pads are needed to be repalced, you might have to replace rotors.
y
replace sensor when pad repacement is done
how much it cost to replace alternator for toyota camry 2003
Yes, you should be able to do that.
take screws out of lense and pull bulb out.
video on how to replace parking brake cable in ford escape 2003
To reset the brake light on a 2003 BMW X5, first, ensure that the brake light bulb is functioning properly and replace it if necessary. Next, turn on the vehicle's ignition without starting the engine. Then, press the brake pedal firmly and hold it down for a few seconds. Finally, release the pedal and check if the brake light has been reset and is functioning correctly.
There is a campaign on the brake bulbs for 2000-2003......If it hasn't been done you should get it done. The bulbs and sockets will be replaced.
1 of 3 reasons why, your head lights are on, your reflector lights are on ,or your brake sensor is broken