answersLogoWhite

0

You'd have to describe 'old trim' -wood trim for house, autobody trim, auto interior trim - - -

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you get the trim to stay on the sides of the cars?

Most trim is held on with double sided tape. Clean the old adhesive off the the back of the molding and the area of the car where the trim goes. Go to autoparts or paint supply place and get 3M double sided tape. It comes in several widths. Get the one that fits closest to the one you need. Clean the area of the car with some clean rubbing alcohol. Then reatach the molding to the car. Hope this helps.


How do you replace 1993 rear hatch glass?

To replace the rear hatch glass on a 1993 vehicle, first, ensure the area is clean and free of debris. Carefully remove the interior trim panels to access the glass, then disconnect any wiring for defrost elements if applicable. Use a glass cutter or appropriate tool to safely detach the old hatch glass, and clean the adhesive surfaces. Finally, apply new adhesive, position the new glass securely, and reattach the interior trim once the adhesive has cured.


How do you replace rear window 2002 dodge Dakota?

To replace the rear window of a 2002 Dodge Dakota, start by removing the interior trim panel surrounding the window. Carefully disconnect any electrical connections if applicable. Use a glass removal tool to cut through the adhesive around the old window, then carefully remove it. Clean the area, apply new adhesive, and set the new window in place, ensuring it is properly aligned before securing it with the trim panel.


What is the process for exterior door trim replacement?

The process for replacing exterior door trim involves removing the old trim, measuring and cutting new trim to fit, attaching the new trim to the door frame, and finishing with caulk and paint for a clean look.


How can I effectively retile a bathroom floor?

To effectively retile a bathroom floor, follow these steps: Remove the old tiles and clean the surface thoroughly. Measure the area and purchase enough new tiles and adhesive. Start tiling from the center of the room and work outwards. Use a tile cutter to trim tiles as needed. Apply adhesive to the floor and press tiles into place. Allow the adhesive to dry completely before grouting. Apply grout between the tiles and wipe off excess. Seal the grout to prevent water damage. Allow the floor to set for at least 24 hours before walking on it.


How do you install a windshield on a 1972 Oldsmobile cutlass convertible?

To install a windshield on a 1972 Oldsmobile Cutlass convertible, first, remove any old sealant and trim around the windshield. Clean the channel where the new windshield will sit, then apply a bead of urethane adhesive along the channel. Carefully position the new windshield in place, ensuring it fits snugly, and press it down firmly to create a good seal. Finally, reinstall any trim pieces and allow the adhesive to cure as per the manufacturer's instructions.


How do you replace a headliner a 1977 delta 88 Oldsmobile?

Well, darling, to replace the headliner in a 1977 Delta 88 Oldsmobile, you'll need to start by removing all the trim pieces and lights attached to the headliner. Once that's done, peel back the old headliner material and scrape off any leftover foam or adhesive. Finally, apply new headliner material using adhesive and reattach all the trim pieces and lights. Good luck, honey!


Do you need to cut back lavender at the end of season?

yes, you trim the spent flower stems off, but you don't trim into old wood


How do you replace window trim on a 2005 sunfire?

The first step would be to remove the old window trim from the vehicle, and clean the surface of residue. A junk yard or dealership will be able to provide you with the replacement trim, which will need to be glued into place.


What are the steps involved in performing a sillcock replacement?

Turn off the water supply to the sillcock. Remove the handle and trim from the old sillcock. Unscrew and remove the old sillcock from the wall. Clean the area around the opening in the wall. Install the new sillcock by screwing it into place. Reattach the handle and trim. Turn the water supply back on and check for leaks.


How can I effectively perform a garage door trim replacement?

To effectively perform a garage door trim replacement, follow these steps: Measure and purchase the correct trim pieces. Remove the old trim carefully. Clean the area and make any necessary repairs. Cut the new trim to fit and attach it securely. Paint or finish the trim as desired. Seal the edges for protection.


How can I effectively remove old tile adhesive?

To effectively remove old tile adhesive, you can use a combination of heat, water, and a putty knife. Start by heating the adhesive with a heat gun or hairdryer to soften it. Then, use a putty knife to scrape off the softened adhesive. You can also try soaking the adhesive with warm water to help loosen it before scraping. Be sure to wear protective gear and work in a well-ventilated area.