Park on a horizontal surface. Get tire iron out. If needed, remove hubcap. Break loose but don't remove the wheel nuts. Tighten hand brake, put car in gear. Get the jack out. Position jack under car at the appropriate place. Jack car up, undo the wheel nuts all the way. Pull wheel off. Roll current wheel aside. Install spare wheel, tighten nuts lightly. Lower car to ground. Do up wheel nuts tight. Pack away tire iron, jack etc and drive.
Yes, a flat tire is considered a physical change because the rubber material in the tire is simply being compressed and there is no change in the chemical composition of the rubber.
It should be --- The professor is running late; she had to change a flat tire.
you can't
You can change a flat tire on a Ford Taurus Wagon by first removing the lug nuts, pulling it off, and replacing with the spare tire.
A tire lever for a bike can be used to efficiently change a flat tire by inserting it between the tire and the rim, then levering the tire off the rim to remove it. This makes it easier to access the inner tube for repair or replacement.
He high jacked it
This enables a flat tire change with a spare tire en route.
it is the wrench that removes the nuts on your tire rim when you change a flat tire. It is a specific size for each brand of vehicle, so make sure you have the one that you will need on a dark rainy night ti change that flat tire.
Are you really prepared for the next time you get a flat tire on the highway? If not read on ....... This page was made for information purposes to educate the public on how to properly and safely change a tire. It serves as a guide for changing a vehicle's tire when a flat occurs. Every time you drive your vehicle, there
Very fastly, if the car is still moving. :-)
To change a flat tire you need a jack, tire iron and a new tire. Jack the car up and remove the bolts, you can then slide the old tire off and replace it with the new one.
To efficiently change a flat tire using bicycle tire irons, follow these techniques: Remove the wheel from the bike. Use the tire irons to pry the tire off the rim. Work the tire irons around the rim to fully remove the tire. Replace the inner tube and re-seat the tire on the rim. Use the tire irons to carefully re-inflate the tire and reattach the wheel to the bike.