Sadly the replacement of front rotors on 95-99 accents require special tools anly availble at a service shop. Rotor replacement requires removal of the hubs and they are press fitted. Some shops have equipment to resurface the rotors while still installed on the vehicle if the rotors are not damaged.
Check to see if the backing plate is rubbing against the rotor or the pads may have a hard spot in them
how to change rotor front disc on 2006 sprinter
help
You don't, but you can replace it. Basically you remove the wheel, which allows you to remove the rotor/hub, which'll allow you to pull the bearing and replace it with a new one. Do note that this description is grossly simplified, and reality is far more complicated.
When you change rotor or main ball joint, or when they get worn.
take off the tire and the caliper and the rotor just slides off
To change the front wheel bearing on a 2001 Hyundai Sonata, start by safely lifting the vehicle and removing the front wheel. Next, detach the brake caliper and rotor to access the wheel hub assembly. Remove the hub assembly by taking out the retaining bolts and using a hub puller if necessary. Finally, press in the new bearing, reassemble the hub, rotor, and caliper, then reinstall the wheel and lower the vehicle.
you have to change the rotor cuz the rotors slightly bent or its groover to bad and when u change the rotor change the pads as well on both sides
the hub must be removed to take off the rotor.special tools are required to remove the rotor.
http://wiki.answers.com/Q/How_do_you_change_the_front_rotor_on_a_89_bronco2"
how do you change the front brake rotor on a 2001 highlander?
I have a similar question, did you find out?