To find the number one position on a distributor cap, first locate the cylinder number one on the engine, which is typically at the front on most vehicles. With the engine off, align the rotor to point toward the number one terminal on the distributor cap. You can also refer to the vehicle’s service manual for specific instructions, as configurations can vary by make and model. Once identified, ensure the ignition timing is set correctly for optimal engine performance.
where is number one on a vortex 4.3 v-6 distributor cap
On most cars the firing order is stamped on the intake manifold. the only thing you will sometimes will find on the distributor cap is the number 1 showing the location of the wire that goes to the number one plug.
On a 1994 Acura Integra, the number one terminal on the distributor cap is typically aligned with the number one cylinder, which is the front cylinder on the engine. When looking at the distributor cap, the number one terminal is usually located at the top or the front, depending on the orientation of the cap. It's essential to confirm the cylinder numbering and the distributor cap layout specific to your engine model for accuracy.
I cannot answer this question.
# 1 on the distributor cap faces to the FRONT / CENTER
Easiest way to find it is to set #1 piston at TDC and remove the distributor cap to see where the rotor is pointing. It should be pointing to #1 cylinder position in relation to the distributor cap.
You can find out in the repair manual for you vehicle.
The marked # 1 position on the distributor cap faces towards the firewall
The marked # 1 position on the distributor cap faces AWAY from the engine
number one wire will point to the number one cylinder
Number one on the distributor cap of a 4.3L V-6 engine would be at the 5:30 location on the cap if you are standing in front of the vehicle with the hood open.
no comment i just need the answer where is the number one spark plug on the 307 distributor cap