You will need to have both snap rings removed and the rest of the locking hub should just pull out easily. You could also try using a 4 pronged socket if you have spindle lock nuts.
First remove the right and left tires, and then proceed to remove the rotors. After you have replaced the rotors put them back on.
you remove the whell and then remove the bolts from the back of the calipier then remove the bolts from the monuting for the caliper then remove the rotor by pulling it off. if it is all one piece then you have to remove the hub itself
Remove the tire and wheel from your 1994 Chevy. Remove the brake assembly. Tap on the rotors with a hammer or mallet. The rotors will slide off. Reverse the process to install the new rotors.
you have remove the whole locking huh?
reset engine light on 2005 Chevy Colorado 3.5 engine
jack it up remove the wheel then the brake calipers then the rotors should slide off
remove wheel remove brake caliper remove locking hubs special tool required to remove axle nut
No.
to remove front rotors you need to remove wheel. then remove 4x4 locking hub.remove brake caliper. next you need a special socket to fit the axle nut.remove this and the outer bearing.then slide rotor off axle making sure not to drop inner bearing.
remove the drive shaft
Jack up and safely support front of vehicle. Remove front wheels. Remove front brake calipers and hang them with wire so not to damage brake hoses. Remove brake caliper brackets. Remove brake rotors. Rotors may need a little persuasion with a large hammer as they may be stuck/rusted in place. Reverse order to install rotors.
how to change rotors on a 2001 Chevy lumina