Through the drivers wheel well You must remove the driver tire. The batery is behind the wheel well cover closest to the bumper.
Remove left front wheel, remove inner fender well, remove battery.
You remove the left front tire, the left fender liner, and then can remove the battery.
Remove the positive battery cable from your 2001 Chrysler Sebring battery. Remove the cables from the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Remove driver side front tire. Remove inner fender liner. Remove battery. Reverse steps.
The battery, on a 2010 Chrysler Limited Sebring, can be changed by first removing the battery cover. Remove the battery cables and the retaining bolt. The battery will left out. Reverse the process to install the new battery.
You need to remove the panel from in front of the passenger side front tire to access the battery. You will also have to remove the air filter housing to get at the battery hold down so you can remove the battery. Hope this helped.
Remove the battery cables for a couple of minutes.
Remove driver side front tire. remove inner fender liner. Battery is inside the front fender wheel.
disconnect the battery. Remove the alternator belt then disconnect the wires. Unbolt the alternator and remove. Bolt the new alternator in then connect the wires, belt, and battery.
2000 Chrysler sebring,to replace battery car must go to dealer to have fender removed so new battery can be installed, they charge $169.00 for this work. Or they remove it through the hatch in the wheel well. Turn wheel fully left. Disconnect terminals. Remove the panel from the left wheel well. Remove the battery hold-down
The battery is under the washer fluid container. You must remove this and then the small cross member to get to the nut which holds the battery. It is easier to remove the left front fender liner and access the battery there.
The battery is under the air intake box behind the left headlight. Its not that hard to remove the air box to get to the battery.