How do i replace 1988 Mercury topaz front brakes?

Answer 1

# If changeing the brake fluid remove master cylinder cap and remove as much fluid as possible # Raise The front of the car and support it # Remove the front wheel and tire assembly # Remove the caliper locating pins using either a hex or a torx& socket # Lift the caliper assembly from the integral knuckle and anchor plate and rotor using rotating motion.Dont pry directly against plastic piston or damage will occur # Remove the outer and inner pads # Suspend the caliper inside fender housing with wire # Use a 4in c-clamp and wood block 2 3/4in X 1in and 3/4in thick against the piston and turn the c-clamp to seat caliper hydraulic piston in its bore